• 3 year battery life.
• Waterproof.

Specifications:

• Temperature Measurement Range: -20°C to 55°C
• Dimensions: 49 x 66 x 17.5mm
• Internal ON/OFF push button
• Weight: 22g
• Colour: Black
• Battery: CR2477, 1pc, replaceable
• Battery Lifetime: 1000mAh, 3 years
• Range (open space): 100m
• Waterproof: IP67
• Wireless

• iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required.
• Courier cost to be calculated and advised accordingly.
• T’s & C’s apply

Features:
– Suitable for 12V batteries.
– Low power 10mA current draw
– Continuously measures the battery to provide information about battery health.
– Wireless.

• iOS / iPhone users, please note our Gateway is compulsory for the Battery Voltage Sensor to work.
• Courier cost to be calculated and advised accordingly.
• T’s & C’s apply

Our TPMS sensors come in kits of 1, 2 and 4.

As an example, if you have 4 wheels on the car plus 1 spare, and you have a trailer with 2 wheels and 1 spare, then you can use two kits of 4 to get the 8 total sensors you need. Use the drop down menu to choose the kit of your choice.

Features:

• Wireless
• Internal installation
• Monitors tyre pressure, temperature and leaks.
• Real time monitoring
• Warning alarm for Air Leak, High/Low Temperature, High/Low Pressure, Low Battery

Sensor Specifications:

• Waterproof Standard: IP67
• Working Humidity: 95% MAX
• Tyre Pressure Detection Range: 0-1300kPa (0-13bar)
• Tyre Pressure Detection Accuracy: ± 10kPa
• Tyre Temperature Detection Accuracy: ± 3?
• Working Temperature: -40? ~ +85?
• Battery Capacity: 330mAh (Not replaceable – sealed unit)
• Battery Life: 3~5 Years (based on 5-3 hours of daily driving)
• Sensor Weight: 33g±1g
• Not to be used with tyre sealant
• Install at reputable Tyre Fitment Centre and ensure tyre is cleaned out thoroughly before installation. Warranty voided for incorrect fitment.

• iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required.
• Courier cost to be calculated and advised accordingly.
• T’s & C’s apply

Our TPMS sensors come in kits of 1, 2 and 4. As an example, if you have 4 wheels on the car plus 1 spare, and you have a trailer with 2 wheels and 1 spare, then you can use two kits of 4 to get the 8 total sensors you need. Use the drop down menu to choose the kit of your choice.

Features:

• Wireless
• External installation
• Easy to install with Anti Theft protection
• Monitors Pressure and temperature
• Real time monitoring
• Warning for Leak, High Temp, High Pressure, Low Pressure, Low Battery
• Replaceable CR1632 battery

What’s in the box:

• Sensors
• Anti Theft Nut
• Spanner*

Sensor Specifications:

• Waterproof Standard: IP67
• Working Humidity: 95% MAX
• Tyre Pressure Detection Range: 0-1300kPa (0-13bar)
• Tyre Pressure Detection Accuracy: ± 10kPa
• Tyre Temperature Detection Accuracy: ± 3?
• Working Temperature: -30? ~ +80?
• Battery Capacity: 140mAh
• Battery Life: 3~5 Years  (based on 5-3 hours of daily driving)
• Sensor Weight: 8g±1g
• Not to be used with tyre sealant

– Like all TPMS units, the sensors go into battery saving mode when stationary or during periods where there are minimal pressure differences.

If you do extensive driving on gravel roads, rocky trails, through mud etc. the Internal TPMS units are recommended.

*No spanner included in single and trailer kit

**You can use extra Sensors from a kit for your Suspension as well

• iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required.
• Courier cost to be calculated and advised accordingly.
• T’s & C’s apply

Please note that due to the variety of air suspension kits and hose sizes available, we recommend that you ask your local fitment centre to install an additional inflation valve/s to your existing air suspension kit. This enables you to buy a standalone tyre pressure sensor (or sensors if you have a split suspension kit) from us and screw this onto the inflation valve to get the measurement on our nGauge 4×4 application.

Features:

• Wireless
• External installation
• Easy to install with Anti Theft protection
• Monitors Pressure and temperature
• Real time monitoring
• Warning for Leak, High Temp, High Pressure, Low Pressure, Low Battery
• Replaceable CR1632 battery

What’s in the box:

• Sensors
• Anti Theft Nut
• Spanner*

Sensor Specifications:

• Waterproof Standard: IP67
• Working Humidity: 95% MAX
• Tyre Pressure Detection Range: 0-1300kPa (0-13bar)
• Tyre Pressure Detection Accuracy: ± 10kPa
• Tyre Temperature Detection Accuracy: ± 3?
• Working Temperature: -30? ~ +80?
• Battery Capacity: 140mAh
• Battery Life: 3~5 Years
• Sensor Weight: 8g±1g

*Like all Pressure Sensor units, the sensors go into battery saving mode when stationary or during periods where there are minimal pressure differences.

• iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required.
• Courier cost to be calculated and advised accordingly
• T’s & C’s apply

The nGauge 4×4 Magnetic sensor consists of a main body, mounted to the door or window frame, and a magnet to be mounted to the door or window.

• Courier cost to be calculated and advised accordingly
• T’s & C’s apply

1. You plan on using the nGauge 4×4 App while it is minimized (running in background).
2. Have a Battery Voltage Sensor or Gas Liquid Level Sensor or plan on buying one.

If you plan on always using the nGauge 4×4 App while it is open (in foreground), and dont have a Battery Voltage Sensor or Gas Liquid Level Sensor, then you dont need the Gateway.

The Gateway can be plugged into a standard USB connector from Car radio or Cellphone charger to power it.

Why does iOS need the Gateway for the nGauge 4×4 App to function while running in the background?
When you minimize or run the nGauge 4×4 App in background mode, iOS blocks the Bluetooth messages from reaching the nGauge 4×4 App, because the App is not “paired” to each individual sensor. To overcome this, we developed the Gateway specially for Apple/iOS. The nGauge 4×4 App will remain connected or paired to the Gateway irrespective if the App is running in foreground or background. The Gateway then acts as a relay and transmits all the Bluetooth messages from the sensors to our App and you are instantly notified by an alarm when an issue occurs.

No manual pairing or set up is required from the user side. Our App will detect the Gateway as soon as it is in range and automatically connect to it to receive the information from your sensors. Please note only one Phone can connect to the Gateway at a time.

• Courier cost to be calculated and advised accordingly
• T’s & C’s apply

Input Overview
The nGauge Relay Module has four separate sensing inputs that can be connected to any 12V power source. Some examples are shown below:
• Vehicle Ignition (ACC)
• High Beam
• Dual battery solenoid switch
• Trailer battery sense

Output Overview
The nGauge Relay Module is capable of switching four independent relays (included in the box) via the nGauge Application. Below is a list of suggested applications for the relays:
• LED Bar light switch
• Air compressor
• Working lights / Flood lights
• Winch Remote (requires 2x relays one for winding out and one for winding in)
• Fridge
• Freezer
• Solar charge controller

Hardware
Connections
The nGauge Relay Module has two wires used to power the unit, four sense input wires and four relay connectors. The two power wires (Red +12V, Brown Ground should be wired to the vehicle battery or 12V power socket via an inline fuse of 5A. The four sense inputs (Grey) can be connected to any power pin for the Relay Module to sense if there is power or not on the specific pin. The sense inputs are isolated to protect the unit and what it is connected to. The relays have three wires available, Common (White), Normally Open (Red) and Normally Closed (Yellow). The common and normally closed wires are connected when the relay is in default state.

nGauge Relay Module Installation
Precautions
Note that the unit is not waterproof, when installing the unit in a location where it will be exposed to fluids it is advisable to install it in an IP65 rated enclosure.

The unit is not designed for mounting directly to the engine! Excessive vibration, moisture and temperature extremes will damage the nGauge Relay or shorten its life span.

Input types
Typical connection diagram

• Flow Sensor Typical Connection

Input 1 and Input 2 of the nGauge 4×4 Relay Module is compatible with standard flow sensors. This can be used to calculate the amount of liquids used out of a fuel or water tank. The counter can be reset from the nGauge 4×4 App.

Technical Data

Hardware

Specifications

• iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required.
• Courier cost to be calculated and advised accordingly
• T’s & C’s apply

• The Dongle is compatible with majority of Victron devices with a VE.Direct Port.
• Preconfigured settings for MPPT, Inverter, Charger and Shunt products
• One meter cable included for optimal placement for better reception, especially when device is installed in a trailer.

Please get in touch if you have existing Victron products installed in your vehicle, and you are willing to provide feedback on the workings of our new Dongle.

IN FINAL TESTING PHASE – PLEASE GET IN TOUCH

• Courier cost to be calculated and advised accordingly
• T’s & C’s apply